Anchoring Systems

Anchoring a kayak when fishing is an integral part of the system not only for safety but also in aiding the angler to control the vessel.  On the water experience has resulted in the design and development of core products with fishing or diving from kayaks and other watercraft in mind. Below is a complete selection of core products for most application and conditions. 


Quick Release Running Anchor System Kits

Designed to allow the release of kayak from anchor, this kit is easy to install and includes full instructions. Quality marine stainless components, 5mm leader with 6mm rope loop is nicer in hand when in use. Fits all types of kayaks up to 4.9m in length. The new Quick Release Running Anchor System is available to suit every kayak make and model kayak including options for existing setup with anchor system already fitted.

Quick Release Running Anchor System Kit
Code: RASQRK

  • Includes fastenings for metric molded-in brass inserts.
  • Rubber well nuts/fastening for kayaks without inserts. 
  • Easy to install and includes detailed instructions.

Quick Release Running Anchor System Kit IMP
Code: RASQRKI

  • Includes 3/16 fastenings for imperial molded-in brass inserts (USA kayaks).
  • Easy to install and includes detailed instructions.

Quick Release Anchor Conversion Kit
Code: RASQRCK

  • Complete conversion system for standard running anchor systems    
  • Converts to the quick release design.    
  • Includes everything needed to convert your running anchor system.    
  • Easy to follow instructions

Top Tip: Combine the new quick release anchor system with an anchor bungee with float to enhance the experience. The benefits include, easy location after release of anchor and absorption of swell surges, choppy conditions and wind gusts. Can be used with both fixed anchors and drift chutes.


Adjustable Running Anchor Systems

The anchor system allows the user to access the anchor from the seating position and uses a loop that runs between two pulley blocks that are fixed to saddles at either end (bow and stern) of the kayak. The swivel snap clip prevents line twisting plus allows the quick attachment and changeover of any number of anchor options available. The system is made using high quality braided polyester cord in 5 or 6 mm options and sizes to suit kayaks that are longer or shorter than 4.3 meters in length. All components used are quality 316 grade stainless fittings. This design offers a multi-fit option making it universal for most brands of kayak. The anchor systems come with fastenings and saddles for easy attachment to all Viking and Ocean Kayak fishing models with molded in inserts. 

Running Anchor Systems (metric fastenings)

  • 5mm and 6mm braided rope options
  • Stainless fittings
  • Includes 5mm bolts
  • Suitable for all kayaks brands with 5mm brass inserts
  • Fits Ocean Kayak (NZ made), Viking Kayaks and more
  • Easy to follow install instructions


6mm Running Anchor System 4.4 to 5 meter Kayaks
Code:RAS1
6mm Running Anchor System 4.3 & Less Kayaks
Code: RAS2
5mm Running Anchor System 4.4 to 5 meter Kayaks
Code:RAS3
5mm Running Anchor System 4.3 & Less Kayaks
Code: RAS2

Running Anchor Systems imperial and non insert kayaks

  • Stainless fittings
  • Includes 3/16 bolts
  • 5mm rubber well nuts and fastenings
  • Suitable for all kayaks brands with imperial brass inserts
  • Fits Ocean Kayak (USA made) Old Town and more
  • Easy to follow install instructions
6mm Running Anchor System 4.4 to 5 meter Kayaks
Code:RAS5
5mm Running Anchor System 4.3 meter & Less Kayaks
Code: RAS6

Fixed Anchor Attachment System

Ideal for kayaks that have incorporated carry handles at the bow and stern, can easily be adapted to all kayaks with the addition of an attachment point. Excellent for kayak diving and spearfishing where fixed anchors are preferred and pedal type kayaks. Includes main leader that connects kayaks carry handle or attachment point via cord loop and carabiner for attachment to anchor pack or kit. The incorporated sliding pull cord connects to the kayaks cock pit area allowing the leader and anchor to be retrieved from the kayaks seating position.

Fixed Anchor System 

  • Stainless fittings
  • Suitable for all kayaks brands
  • Easy to install
  • Code:FAAS


Anchor Bungee Systems

Designed to absorb and prevent jolting of kayak in conditions where large swells and wind gusts are encountered. Connects between running anchor system and choice of anchor using the stainless steel ring and quick link with inner bungee and outer webbing tube.

Anchor Bungee
Code: AB

  • Marine grade
  • Stainless fittings    
  • Compressed length 90cm   
  • Extends to 1.5 meters

Anchor Bungee Float
Code: ABF

  • Marine grade
  • Stainless fittings
  • Styrene float (bright white) 
  • Compressed length 90cm
  • Extends to 1.5 meters

Drift Chute

Ideal for drift fishing including techniques where soft baits and plastics are used. Slows down all size kayaks to an ideal speed even in higher wind speeds. Efficient external float allows the drift chute to be positioned so it sits correctly in relation to the kayak just below the waters surface. Float aids in retrieval and also prevents the drift chute from sinking below the kayak which can make it inefficient Built to last - New Zealand made using quality marine grade materials and 316 Stainless fittings. 

Code: DC

  • Marine grade
  • Float
  • Stainless fittings
  • Colour black.
  • Highest quality materials
  • Includes mesh storage bag

Fixed Anchors

Designed for anchoring of kayak to sea floor with two designs catering to rocky reef areas, soft and sandy substrates. Longer chain ensures a more positive anchor attachment and absorption of choppy water conditions and swells.

Anchor Packs
  • Ergonomic floating winder
  • 50 meters 4mm polypropylene rope
  • 6 meters galvanized chain
  • galvanized shackles
  • breakaway rig
  • stainless thimble.

Anchor Pack Grapnel
Code:APG
Designed for reef areas - Prongs bend for easier dislodging
Anchor Pack Folding 0.7kg
Code: APF7
Suitable for sand and reef areas - Anchor folds down to compact size.
Anchor Pack Folding 1.5kg
Code:APF15
Extra holding power in sand areas - Anchor folds down to compact size.

Anchor Kits
  • Ergonomic floating winder
  • 50 meters 4mm polypropylene rope
  • 6 meters galvanized chain
  • galvanized shackles
  • breakaway rig
  • stainless thimble.
  • Heavy duty PVC bag with eyelets for drainage and attachment

Anchor Kit Grapnel
Code:AKG
Designed for reef areas - Prongs bend for easier dislodging
Anchor Kit Folding 0.7kg
Code: AKF7
Suitable for sand and reef areas - Anchor folds down to compact size.
Anchor Kit Folding 1.5kg
Code:AKF15
Extra holding power in sand areas - Anchor folds down to compact size.

Mussel Farm/Mooring Hook

The correct anchoring method is required by the Aquaculture Marine Farm Industry when fishing within mussel farms. Design provides easy safe attachment to the surface ropes. Can also be utilized for quick easy attachment to boat moorings and more.  NZ made using welded 316 stainless.  

Code:MFH
  • 316 Stainless Steel
  • Welded attachment ring
  • Kayaks, Jet Skis, small dinghy's and inflatables

Winder

The ergonomic design offers comfortable handing that won't cause cramping when operating. Large capacity offers options to hold 50 meters of 4mm rope. 

Code:WIN
  • Marine grade plywood.
  • Unique lock off design allows rope length adjustment.
  • Holds 50m rope.
  • Floats

Get information on anchoring - Get a full rundown on using the Rob Fort Series anchoring range plus more in an easy to follow video from NZ Kayak Fishing HERE!

© Copyright Rob Fort Series - Site map
Phone: 0275576552 Coromandel New Zealand

Website Builder - Website World